Stolen Compressor Preload Bolt Kit999 ₽
Cult Sect M24 Maintain Everyday Верхний Болт Для Вилки BMX1590 ₽
Mission M24 Верхний Болт Для Вилки BMX579 ₽
BSD M24 Acid Верхний Болт Для Вилки BMX1890 ₽
Odyssey R/F Series Pre-Load Bolt2899 ₽ 2890 ₽
Stolen Vortex Redeux Верхний Болт Для Вилки BMX1490 ₽
Colony BMX Fork Top Cap Bolt1099 ₽ 989 ₽
Tall Order BMX Fork Top Cap999 ₽
Salt Plus Верхний Болт Для Вилки BMX1399 ₽ 1090 ₽
Stay Strong Race Topbolt2490 ₽
Total BMX M25 Верхний Болт Для Вилки BMX2490 ₽
Maximize Your Performance With a BMX Top Cap
The BMX top cap is the screw found at the top of your fork and just above the headset. This little component is often overlooked but is important. It is not only compressing your fork and stem against the headtube of your frame but also holding your headset in the right place to ensure smooth bar rotations.
There are several names for top caps, such as BMX compression bolt, compression cap or BMX fork bolt. All these terms refer to the same thing and are used interchangeably. BMX top caps bolts are usually made from aluminum, ensuring that they don’t add too much weight to your bike.
With all top caps, you need to know whether it is compatible with your fork. Most important is the thread size, which can be found in our product descriptions and specification section.
How to Install and Remove Top Caps
Installing and removing a top cap is a relatively straightforward process. To replace the cap, you will first need to loosen the stem bolts with either a 6 or 8 mm Allen key. Once you have done this, you should be able to simply use the right-sized Allen key to unscrew the old top cap and replace it with the new one. Make sure that the cap is screwed in securely so that your setup feels sturdy.
Looking to upgrade more of your bike? Check out our range of BMX Forks.